Model “MVS 4000 (LVGS 1CTS2CTL4SB)” is a profile sander in the “MVS” series designed to sand frames, rods, moldings, window frames, veneered, solid wood and raw or coated MDF (coated with paint, polyurethane base coats, polyester or other coatings).
Model “MVS 4000 (LVGS 1CTS2CTL4SB)” is fitted with a thick steel frame, designed to compensate vibrations and guarantee perfect stability even during the more demanding work phases. The fixed base is 4 meter long and the work aggregates are aligned on the right or left hand side of the belt modules. The support feet allow the work height adjustment. Moreover, the “MVS 4000 (LVGS 1CTS2CTL4SB)” is designed to sand all four sides of the profile.
THE AGGREGATES
“MVS 4000 (LVGS 1CTS2CTL4SB)” )” is fitted with seven aggregates, three of which are belts (one “CTS” top belt and two “CTL” side belts) and four wheel sanding units of the Scotch Brite (“SB100”) type, abrasive wheels for finishing, denibbing and brushing the sanded surfaces. The four “SB100” aggregates operate on the profile side (with a useful thickness range up to 100 millimeters and 1.5 kW motor) and they can be inclined up to 180 degrees.
With its flexible set-up, model “MVS 4000 (LVGS 1CTS2CTL4SB)” can process parts with a minimum length of 500 millimeters and up to 200 millimeters in width, with a thickness up to 80 millimeters, and it offers high quality results in a contained timeframe.
CONVEYOR SYSTEM
The parts run on six 120 mm rectified rubber belts with central guide, activated by a cardanic drive with elastic compensating joints. The drive motor (2.2 kW) sits in a central position; the speed can be electronically adjusted via frequency drive. The side guides are bars with idle rubber rollers adjustable in width and thickness (rack system).
MACHINE TECHNICAL FEATURES
Workable sides: 4
Minimum part length: 500mm
Maximum part width: 200mm
Maximum part thickness: 80mm
Number of conveyor belts: 6
Number of sanding wheels per slot: 1
Processing speed: from 10 to 40m/min
Conveyor motor power: 2.2kW
Worktop height: 900mm
Total installed power: 17kW
Voltage: 400V
Machine length: 3.920mm
Machine width: 2.800mm
Machine height: 2.300mm
Part infeed-outfeed: manual
AGGREGATE TECHNICAL FEATURES
“CTS”
Work surface: 200mm
Motor power: 3kW (4hp)
Variable belt rotation speed: 0.5 to 11m/s
Sanding belt oscillation motor: 0.37kW
Adjustable work angle: fixed 90degrees
Pulley thickness: 200mm
Sanding belt maximum size: 2,320 x 200h mm
“CTL” (2 units)
Work surface: 130mm
Motor power: 2.2kW (3hp)
Variable belt rotation speed: 0.5 to 11m/s
Sanding belt oscillation motor: 0.37kW
Adjustable work angle: fixed 0degrees
Pulley thickness: 130mm
Sanding belt maximum size: 2,320x130h mm
“SB100”
Motor power: 1.5kW
Wheel size: 200x100mm
Suction port size: 100mm
Wheel rotation speed: between 420 and 1,720rpm
Wheel shaft: 30mm
Spindle-sanding wheel connection flange: 76mm
Angular adjustment: from -90 to +90 degrees
AVAILABLE ACCESSORIES
Electropneumatic system with timed intervention on infeed and outfeed of the sanding aggregate, manageable from the touchscreen panel.
Bi-directional Electronic recovery system to compensate for the sanding wheel wear, controlled by the programmable logic, to compensate wear in all operating positions.
Pneumatic blower to clean the parts with housing and spinning blowers with timed intervention inside.
“Industry 4.0” Set up.
PROFILES
“MVS 4000 (LVGS 1CTS2CTL4SB)” can process the following types of profiles:
