Model “MVT 2000 (LVGT 2CTL)” is a single-side edge sander in the “MVT” series, a set of automatic solutions for sanding MDF and chipboard panel edges coated with PU base or water-base products. This machine is designed to process furniture components and it is suitable for matt and glossy kitchen doors, interior doors, and ideal for raw panels.
THE AGGREGATES
Model “MVT 2000 (LVGT 2CTL)” is equipped with two “C” aggregates with side pad. These are belt sanding units for flat surfaces, with pneumatic adjustable pad. The pad operation with electropneumatic control is easy to manage over the touchscreen and the machine has a “PLC” (“Programmable Logic Controller”) as a general automation control unit and a dedicated “PLC” on each individual unit.
FRAME AND CONVEYOR
“MVT 2000 (LVGT 2CTL)” consists of a thick steel frame, designed to compensate vibrations and guarantee perfect stability even during the more demanding work phases.
The side guide keeps the part straight while running in the machine on a track – which runs on two interchangeable steel guides – with a steel chain, on which the pads covered in high-resistance rubber 80 mm wide are fixed. The motor power is 1.1 kW and the part running speed – electronically adjustable with inverter – can be set from 5 up to 25 meters per minute.
MACHINE TECHNICAL FEATURES
Workable sides: 1
Minimum part length: 200mm
Minimum part width: 50mm
Maximum part thickness: 100mm
Processing speed: from 5 to 25m/min
Conveyor motor power: 1.1kW
Worktop height: 900mm
Total installed power: 7kW
Voltage: 400V
Machine length: 3,400mm
Machine width: 1,700mm
Machine height: 1,500mm
Part infeed-outfeed: manual
AGGREGATE TECHNICAL FEATURES
“CTL” (2 units)
Work surface: 130mm
Motor power: 2.2kW (3hp)
Variable belt rotation speed: 0.5 to 11m/s
Sanding belt oscillation motor: 0.37kW
Adjustable work angle: fixed 0degrees
Pulley thickness: 130mm
Sanding belt maximum size: 2,320x130h mm
AVAILABLE ACCESSORIES
Pneumatic blower to clean the parts with housing and spinning blowers with timed intervention inside.
“Industry 4.0” Set up.
EDGES
“MVT 2000 (2CTL)” can process the following type of edge:
Want to see the “Destefani MVT” in operation? Click here.